Medical Oxygen Generator

Product Overview

This medical PSA oxygen generator is designed for hospitals and clinics that need a stable, on-site oxygen supply without relying on bottled deliveries. It produces medical-grade oxygen continuously, and the whole system runs automatically, so day-to-day operation is really straightforward for the staff.

Application Scenarios

You’ll see it in general hospitals, emergency centers, isolation wards, ICUs, operating rooms, and even small clinics. Basically, anywhere that needs a steady supply of clean, reliable oxygen for patients — especially places where cylinder logistics are expensive or hard to manage.

Technical Advantages

The system uses PSA technology to keep oxygen purity consistently at medical standards. It monitors purity, pressure, and flow in real time, so it adjusts itself without you having to do anything. The backup functions are solid too — if something isn’t right, it’ll alarm automatically, and the standby line can kick in to keep oxygen supply uninterrupted.

Quality Control

Before leaving the factory, each machine goes through a full medical-standard testing process: purity verification, flow and pressure checks, leak tests, valve timing calibration — the whole package. By the time it reaches the hospital, it’s already been run and checked under real conditions, so installation is quick and startup is simple.

20 Cubic TYFO93-20 Containerized Oxygen Generator with Tank filling System (Purity is 93 ± 3%) Configuration

Air compressor

Air Compressor: TAIWAN HANBELL Permanent magnet frequency conversion VSD air compressor AA6-37A-0.8 Air Output:6.8m3/min, 8bar 37kW 380V50Hz 3Phase.  With Air cooling system

Air filter & Oxygen filter

air filter HBF-24FC-1 remove 99% water Flow rate: 10.7m3/min

air filter HBF-24FC-2, 1um,0.6ppm grade

air filter HBF-24FC-3, 0.01um,0.0lppm grade 10m3/min

air filter HBH-10 Carbon Activated air filter, 10m3/min 

02 filter HBF-24FC-4, 0.01μm,0.01ppm grade 6m3/min

Sterilization filter g1050, 0.01um grade 10m3/min G1/2"

Refrigeration Dryer

Refrigeration dryer:HB0080 8.8m3/min, 2HP 220V 50Hz 3PhaseAir Cooling; Max Inlet temperature: 80'C

Adsorption dryer tower

Adsorption dryer tower:2 piece, TYFO93-20 (1 set) desiccant , Dew point:-56~-62.5 C

Oxygen generator

Taiyang patent integraed valve  Electronic drain valve

Oxygen flowmeter: 20Nm3/H, purity is 93+-3%

Oxygen analyzer: Chang Ai , oxygen analyzer:Cl-6600:+2%FS

Pressure dew point meter: Chang Ai Cl series

Molecular sieve: Taiyang molecular sieve; the service life of oxygen molecular sieve is more than 5-8 years

PLC system: Siemens plc control system S2-700

Alarm system: Alarm system: pressure, purity, temperature etc

Online monitoring system.

Touch screen: Taiyang 7" touch screen, real-time data display and historical date, one button start&stop

Gas Tank

Shanghai Shenjiang Pressure Vessel CO.,LTD. Air storage tank: 0.3m3, with safety valve, drain valve,pressure guage; (including certificates and accessories), pressure 0.8Mpa;

Dry compressed air tank,  (including certificates and accessories), pressure 0.8Mpa;

Oxygen surge tank

Shanghai Shenjiang Pressure Vessel CO.,LTD. g Oxygen storage tank:0.3m3, with safety valve, pressure guage;  (including certificates and accessories), pressure 0.8Mpa;

Cylinder filling system 20/3-150 xygen compressor: 20m3/h, 150bar,oil-free, 3-stage compress,Air cooling, 11Kwcylinder filling ramp,with pressure guage,150Bar, safety valve,5+5 hose.20ft Container package

Container package, including lighting, emergency light, insulation layer, air flow duct, 1.5HP AC.

distribution cabinet, fan, manintenance door.